PRODUCT
PRODUCT
Stainless Steel
Stainless Steel Plate
Stainless steel plates can be divided into austenitic stainless steel, ferritic stainless steel, martensitic stainless steel, duplex stainless steel, etc. The most common ones are 201, 201L, 301, 304, 304L, 316, 316L, 409 etc
Stainless Steel Coil
Stainless steel coils can be divided into austenitic stainless steel, ferritic stainless steel, martensitic stainless steel, duplex stainless steel, etc. The most common ones are 201, 201L, 301, 304, 304L, 316, 316L, 409 etc.
Stainless Steel Pipe
Stainless steel pipes are important products in the steel industry and can be widely used in daily decoration and industrial fields. Many people in the market use it to make staircase handrails, window balustrades, railings.
Stainless Steel Bar
Stainless steel rods can be divided into round steel, square steel, flat steel, hexagonal steel, and octagonal steel according to their shape. Common materials: 304, 304L, 321, 316, 316L, 310S, 630, etc.
Carbon Steel
Carbon Steel Plate
Carbon steel plate mainly refers to steel with a carbon mass fraction less than 2.11% and without special added alloy elements. Commonly used materials include A36/S235JR/A283/A514/A572/S355JR/A709/A285/A387/A515 etc.
Carbon Steel Coil
Carbon steel coil mainly refers to steel with a carbon mass fraction less than 2.11% and without special added alloying elements. Commonly used materials include A36/S235JR/A283/A514/A572/S355JR/A709/A285/A387/A515 etc.
Carbon Steel Pipe
Carbon steel pipes are made from perforated steel ingots or solid round steel, and then hot rolled, cold rolled, or cold drawn. Commonly used materials include A53/A106/API Spec 5L/A179/A213//A335/SSAW etc.
Carbon Steel Bar
Carbon steel round steel is a steel with a carbon content greater than 0.08%, and is one of the most widely used materials in the construction industry. Commonly used materials include A36/S355JR/1018/1025/4130/EN8 etc.
Steel Rebar
Steel bars are steel used for reinforced concrete and prestressed reinforced concrete, with a circular cross-section and sometimes a square shape with rounded corners.
Wire Rod
Ordinary quality steel wire includes welding rods, nail making, mesh making, packaging and printing industry steel wire, cold heading rivets and screws for cold heading forging steel wire, etc.
Zinc/Aluzinc/Color Coated Steel
Color Coated Plate
Color coated board is made from metal sheets as the substrate, coated or laminated with various organic coatings or plastic films on the surface, and can be divided into PPGI and PPGL.
Color Coated Coil
Color coated rolls are lightweight, aesthetically pleasing, and have good corrosion resistance. They can also be directly processed and are generally classified into gray white, navy blue, brick red, and other colors.
Galvanized Steel Sheet
Galvanized steel plate is coated with a layer of metal zinc to prevent corrosion on the surface of the steel plate and extend its service life. It is divided into hot-dip galvanizing and electrogalvanizing.
Galvanized Steel Coil
Galvanized coil is made of hot-rolled or cold-rolled steel strip as the substrate, which is divided into hot-dip galvanizing and electrogalvanizing.
Galvalume Steel Sheet
The coating composition of aluminum zinc plated plate is composed of 55% aluminum, 43.4% zinc, and 1.6% silicon in weight ratio, respectively. Aluminum zinc plated steel plate can prevent long-term rusting of the steel plate.
Galvalume Steel Coil
The coating composition of aluminum coated zinc coils is composed of 55% aluminum, 43.4% zinc, and 1.6% silicon in weight ratio, respectively. Aluminum zinc coated steel coils can prevent long-term rusting of the steel coils.
Aluminum
Aluminum Plate
Aluminum plates are generally divided into pure aluminum plates, alloy aluminum plates, thin aluminum plates, medium thick aluminum plates, patterned aluminum plates, etc.
Aluminum Coil
Aluminum coil is a metal product produced by a casting and rolling mill after rolling, bending, and angle machining for flying shear. Aluminum coils are widely used in automobiles, electrical appliances, etc.
Aluminum Pipe
Aluminum pipes include pure aluminum or aluminum alloy aluminum pipes, which can have one or more closed through-holes, uniform wall thickness and cross-sectional area, and are delivered in a straight or rolled shape.
Aluminum Bar
Aluminum rods are made of aluminum alloys with different contents. There are commercial pure and alloy versions. Provide aluminum rods of various grades, types, and specifications.
Tinplate Steel
Tinplate Sheet
Tinplate (commonly known as tinplate) refers to a steel plate with a thin layer of metal tin coated on its surface. Tinplate is a steel plate made of low-carbon steel rolled into a thickness of approximately 2mm.
Tinplate Coil
Tinplate roll is a widely used metal material with a thin layer of tin covering its surface. This technology can make ordinary metal sheets have characteristics such as corrosion resistance and oxidation resistance.
Alloy
Alloy Plate
Alloy plate is a manufacturing material made by mixing two or more metal elements. It is usually used to manufacture various products, including building materials, aerospace components, automotive parts, etc.
Alloy Coil
Alloy coil is a new type of metal material that is composed of a certain proportion of low alloy elements and ordinary steel.The main materials are: Hastelloy, Monel, nickel alloy, titanium alloy, Inconel, Incoloy, etc.
Alloy Pipe
Alloy pipes can be divided into circular pipes, square pipes, rectangular pipes, hexagonal pipes, etc. according to their shape. The main materials are: Hastelloy, Monel, nickel alloy, titanium alloy, Inconel, Incoloy, etc.
Alloy Bar
Alloy rods can be divided into round rods, square rods, hexagonal rods, etc. according to their shape. The main materials are: Hastelloy, Monel, nickel alloy, titanium alloy, Inconel, Incoloy, etc.
Silicon Steel
Non-Oriented CRNGO
Non oriented silicon steel is a silicon iron alloy with very low carbon content, and its grains exhibit irregular orientation distribution in the steel plate after deformation and annealing.
Oriented Silicon Steel CRGO
Oriented silicon steel, also known as cold-rolled transformer steel, is an important ferrosilicon alloy used in the transformer (iron core) manufacturing industry.
Copper
Copper Plate
Copper plate has good conductivity, thermal conductivity, and plasticity. Therefore, it is widely used in various industries, such as building roofs, vehicle components, printed circuit boards, etc.
Copper Coil
Copper coils are usually relatively thin copper sheets that can be cut into any length according to demand, and have good conductivity, thermal conductivity, and plasticity.
Copper Pipe
Copper pipes have good conductivity and thermal conductivity, strong corrosion resistance, are not easy to oxidize, and are not prone to chemical reactions with some liquid substances, making them easy to bend and shape.
Copper Bar
The surface of the copper rod forms an oxide film and turns rosy red and purple. Good mechanical properties, good hot plasticity, acceptable cold plasticity, good machinability, and corrosion resistance.
Automotive Steel
Martensitic Steels
Martensitic (M) steel has very high yield strength (Re) and extremely high tensile strength (Rm). Docol ® Martensitic steel has good deep drawing properties and good edge tensile properties.
Hot Formed Steel
Hot formed steel, the forming process determines the final characteristics of the material. High temperature forming is beneficial for complex structures, as martensitic microstructures are formed after compression hardening.
Duplex Steel
Multiphase steel has higher yield strength and lower work hardening effect. These steels are suitable for applications that require high strength, good bending properties, and tensile flange capabilities.
High Edge Ductile Steel
High edge ductility steel for automobiles, Docol ® HE is a series of new hot rolled advanced high-strength steel with improved edge ductility, suitable for automotive manufacturers facing production technology challenges.
Third Generation Dual Phase Steel
Dual phase steel has good formability relative to strength, but its expansion ability is limited. It has good weldability but is sensitive to heat treatment.
High Strength Low Alloy Steel
The difference between yield strength and tensile strength of high-strength low alloy (HSLA) steel is usually small, as they have excellent bending performance and better precision punching performance.
Profile
H-Beam Steel
H-beam steel is widely used in industrial and civil steel structures, such as beams, load-bearing brackets for industrial structures, and supports for ships, trains, automobiles, conveyor belts, and highway fenders.
Universal Beam (I-Beam)
I-beams can not only be processed through cutting, welding, and other methods, but also be applied in various fields of architecture and structure.
Channel Steel
Channel steel is a long strip steel with a groove shaped cross-section, belonging to the carbon structural steel used for construction and machinery. It is a complex section steel with a groove shaped cross-section.
Angle Steel
Angle steel is mainly divided into two types: equilateral angle steel and unequal angle steel, which are widely used in various building and engineering structures, such as beams, bridges, ships, industrial furnaces, etc.
Accessories
Fasteners
Fasteners are a type of mechanical components that are widely used for fastening connections. The characteristic is a wide variety of specifications, with different performance and uses.
Catalogue
FAQ
MANUFACTURING
Manufacturing Process
Production Lines and Equipments
Third Party Inspection Reports
Mill Test Certificates
Inspection Process
Warehouse Inventory
Packaging Details
Product Knowledge
PROJECTS
NEWS
JIANCHENG NEWS
Company News
Industry News
Exhibitions Info
Exhibition Experience
Upcoming exhibitions
Shipping News
THEY TRUST US
ABOUT US
About Jiancheng
Message from the GM
Organization Structure
Why Choose Us



Language

Contact Us

After-sales Support

NEWS

Company News
Industry News
Exhibitions Info

7075-Aluminum Bar-500mm

Previous：Already the first

Next：Already the first

Product

Stainless Steel
Carbon Steel
Zinc/Aluzinc/Color Coated Steel
Aluminum
Tinplate Steel
Alloy
Silicon Steel
Copper
Automotive Steel
Profile
Accessories

Manufacturing

Manufacturing Process
Production Lines and Equipments
Third Party Inspection Reports
Mill Test Certificates
Inspection Process
Warehouse Inventory
Packaging Details
Product Knowledge

About Us

About Jiancheng
Message from the GM
Organization Structure
Why Choose Us

CONTACT US



Tel :+86-18063502469



Whatsapp: +86-18063502469



WeChat: +86-18063502469



Email :anson@sdjcmaterial.com



Address : Industrial Park, Liaocheng City, Shandong Province, China

SOCIAL MEDIA



YouTube



Tik Tok



Facebook



Whatsapp

SHANDONG JIANCHENG NEW MATERIAL CO.,LTD



zhaoyang@sdjcmaterial.com

HAVE ANY QUESTION?

WhatsApp

MESSAGE



PRODUCT

- PRODUCT
  
MANUFACTURING

PROJECTS
NEWS

ABOUT US




English

Русский язык

Español

العربية

にほんご

한국어

Deutsch

Français

Português

ไทย

Việt

Nederlands

Ελληνικά

svenska

magyar

čeština

suomi

dansk

język polski

Italiano







Consulting Bulk Order Discounts

Jiancheng Steel is committed to providing the most reliable and satisfactory steel and metal product solutions to global users.

SUBMIT

Carbon Steel



Stainless Steel



Coated Steel



Alloy



Silicon Steel



Aluminum



Copper



Automotive Steel



Tinplated Steel



Profile



Others





+86-15020667779





+86-15020667779

MESSAGE